Replicator 1,2,2x

[sho]

I printed "coreboard" about 3 month ago.


Printer: Replicator2

Print options:
Raft:Yes
Supports:yes
I used default Profile "LOW". But, I changed speed faster.
Speed while Extruding: 150mm/s
Speed while Traveling: 200mm/s

Quality is same.
Infill: 10%
Shells: 2
Layer Hight 0.3 mm
Temperature: 230℃

Printed time:about 2hours
Result:
Printed:yes
use:difficult. Because of the shape of pin and hole.
Hole is small, and pin is fragile.
I wrote about this at here.