Threaded Mode | Linear Mode

***sho*** · 12-04-2014, 01:27 AM

It's perfect...

**xoan** · (This post was last modified: 12-12-2014 12:58 PM by xoan.)

Not so many pictures about iterations, but: https://www.dropbox.com/sc/fmw0s3prkcso5...X2oHSoSLha

This is actually the 3rd iteration, and there is no flexible sensors nor core attach system, but is almost functional.

So I'm doing some cleanup in the FreeCAD files and generating STL's. I'll post links to this files in the next days for testing printabillity.

UPDATE. Files are now in GitHub: https://github.com/xoan/shellmo-repmipede (refer to `src/chassis.fcstd' and figure out how to assembly using M3x8mm screws and M3 nuts Smile

PS. All the parts have been printed at 0.25mm layer height with 0.5mm extrusion width, but it is advised to have a well calibrated machine (+/- 0.05mm on measured parts)

**steamboat** · 12-12-2014, 08:03 AM

Looks great!

***sho*** · 12-12-2014, 03:06 PM

Beautiful..
Can I post about it to our members page on Facebook ?

**xoan** · 12-12-2014, 06:55 PM

(12-12-2014 03:06 PM)sho Wrote: Can I post about it to our members page on Facebook ?

I've posted the same information in Facebook group. Perhaps I should link this thread in Facebook post, right?

**xoan** · (This post was last modified: 12-13-2014 10:27 AM by xoan.)

It walks: https://www.dropbox.com/sc/fmw0s3prkcso5...4VZ6Dba/21 Smile