Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Printing RepWalker Mutation RA04
05-06-2014, 12:31 AM
Post: #10
RE: Printing RepWalker Mutation RA04
(05-06-2014 12:17 AM)jmccartney Wrote:  but maybe thats being too picky..
No not picky just a question of concept. I am a MAKER 1.0 with lathe and mill and and and in the basement. So for me drilling is a must if you build something Blush

But that is why we communicate here. I made the servo long slot 3.2 mm because I know from MAKE 1.0 that it is not easy to enlarge a long slot with a drill. So I did the first step here and will do for all other holes in release RA4.1 - so with this all MAKER 2.0 (or what count are we dealing with in the moment) and the "generation touch screen" - can do it without a drill.

I am curious about your oppinion to the leg and it's axis. Here I have a concept of ZERO clearance between the 5 mm hole and the 5 mm axis. For me it is easy to take a 5.1 or 5.2 mm drill to make it a perfect bearing fit. But what about the "Tochscreeners". I have heard that most holes on the easy printer are to small? I could (should?) go here to 5.2 mm in the boss also...

Rainer
http://www.steamboating.de
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Printing RepWalker Mutation RA04 - steamboat - 05-06-2014 12:31 AM
First movement - steamboat - 05-06-2014, 07:03 AM
Servo - steamboat - 05-07-2014, 04:04 AM
Hip-joint back to 5 mm - steamboat - 05-10-2014, 08:18 PM
RE: Printing RepWalker Mutation RA04 - sho - 05-14-2014, 01:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)