Printing RepWalker Mutation RA04

[steamboat]

Hello Team,

I edited all files according to your helpful hints:

- changed all M3 holes from Ø 3 mm to Ø 3.2 mm now.
- changed the M3 hex cut out from 6.1 to 6.0 height.
- the Ø 5 mm bores for the axis from Ø 5 mm to Ø 5.4 mm
- moved the position of the servo mount bores in #1-muscle-torso 1 mm higher.
- changed the bores in #2 and #3 accordingly

Additional I tried to make it easier to assemble RepWalker without an instruction - for kids or other nervous human beings...
Changed the hip-axis from nominal Ø 5 mm to Ø 6 mm so you will recognize it if you are doing something wrong.

The hind-leg has the longer axis so the change from Ø 5 to Ø 6 mm makes it even safer to print.

The c-rings are the same for the Ø 5 and Ø 6 mm axis...

Have printed all new parts except the legs already. Want to go to bed now.

You can download all new files with the ending 4.1 from my webpage.
http://shellmo.radow.org/repwalker-ra04/...#stl-files

Tomorrow I will publish it at Thingiverse also. Is there any other interesting platform where I should publish it?