Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Macropede studies
05-26-2014, 02:33 AM
Post: #9
Current - torque
I repeated the test with 4 rechargeable batteries.
4,5 Volt 150 mA free turning
500 mA with heavy load by finger but still fast turning.
800 mA break current.

I think it is really necessary to have a special current and turning management for robots with legs. To start the legs might need high voltage/current (full voltage / no pulse and allow current of 800 mA for a short time). After the gear becomes loose we have to reduce the voltage to avoid to go to fast. If there is an external blockage (more than 750 mA) Shellmo should stop and shout out loud. Shellmo also could try to recover by going backwards for 1/2 turn - and so on...)

Rainer
http://www.steamboating.de
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Macropede studies - steamboat - 05-15-2014, 08:43 AM
RE: Macropede studies - jmccartney - 05-15-2014, 09:13 AM
RE: Macropede studies - steamboat - 05-15-2014, 05:09 PM
RE: Macropede studies - jmccartney - 05-15-2014, 11:03 PM
First run of Macropede leg set - steamboat - 05-24-2014, 04:16 PM
RE: Macropede studies - sho - 05-24-2014, 04:41 PM
RE: Macropede studies - steamboat - 05-24-2014, 11:00 PM
Current - torque - steamboat - 05-26-2014 02:33 AM
A dream comes true! - steamboat - 05-26-2014, 07:10 AM
RE: Macropede studies - jmccartney - 05-28-2014, 06:14 AM
RE: Macropede studies - steamboat - 05-28-2014, 06:50 PM
RE: Macropede studies - jmccartney - 05-29-2014, 02:08 AM
RE: Macropede studies - steamboat - 05-29-2014, 04:17 AM
RE: Macropede studies - steamboat - 05-29-2014, 05:58 AM
All gears in mesh - steamboat - 05-30-2014, 01:18 AM
All legs in place - steamboat - 05-30-2014, 03:48 AM
RE: Macropede studies - jmccartney - 05-30-2014, 04:47 AM
RE: Macropede studies - steamboat - 05-30-2014, 10:59 AM
RE: Macropede studies - jmccartney - 05-30-2014, 11:29 AM
RE: Macropede studies - steamboat - 05-31-2014, 01:51 AM
RE: Macropede studies - sho - 05-31-2014, 04:48 AM
RE: Macropede studies - steamboat - 05-31-2014, 06:11 AM
Result - steamboat - 05-31-2014, 07:34 AM
It's running - steamboat - 05-31-2014, 08:37 PM
RE: Macropede studies - sho - 06-01-2014, 01:08 AM
RE: Macropede studies - steamboat - 06-01-2014, 04:31 AM
RE: Macropede studies - steamboat - 06-01-2014, 07:17 AM
RE: Macropede studies - steamboat - 06-02-2014, 02:49 AM
Shell for Macropede - steamboat - 06-02-2014, 04:59 AM
RE: Macropede studies - jmccartney - 06-02-2014, 06:46 AM
RE: Macropede shell studies - steamboat - 06-07-2014, 06:03 AM
next step - steamboat - 06-09-2014, 08:31 AM
Macropede R2 - steamboat - 07-02-2014, 07:11 AM
RE: Macropede studies - steamboat - 07-02-2014, 08:51 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)